Molding Operator Job Description


Author: Albert
Published: 21 Mar 2020

The Operator of a Machine, The Injection Molder Operator, Blow moulding jobs in the U.S and more about molding operator job. Get more data about molding operator job for your career planning.

Job Description Image

The Operator of a Machine

The operator observes the operation of machines to make adjustments if necessary. The operator of the machine uses measuring instruments to inspect and measure products for surface and dimensions defects. The operator of the machine tends to the machines or sets them up.

The operator of the machine secures work pieces and starts feeding them. The operator of the machine turns valves and dial machines to regulate pressure, temperature, and speed. The operator skims or pours molten metal using ladles, rakes, hoes, spatulas, or spoons.

The operator trims excess material from parts using knives and grinds scrap plastic into powder for reuse. The operator cools products after they are processed. The operator of the machine must install dies on machines and then coat them with agents.

The operator of a machine needs knowledge of production processes, costs, and techniques for maximizing the effectiveness of their work. The operator of a machine needs to conduct tests and inspect products and processes to evaluate their quality. The operator controls the equipment.

The operator of the machine must take time to understand what is being said, ask appropriate questions, and not interrupt at inappropriate times. The operator of the machine needs to know how to make improvements or take corrective action. The operator of the machine needs to know what causes of errors are and what to do about them.

See also our post on Traffic Operator job guide.

The Injection Molder Operator

Operators work with injection molded objects. The parts fall out of the mold when the machine is running. In some cases a robot is used to remove parts.

Sometimes the operator will separate the parts from the runners. The injection molder operator's job is more than what you may think. The operator waits for the mold to open.

When the mold is completely open, the operator opens the front safety gate door and checks the safety bar. The operator reaches in between the mold halves to remove the plastic parts after seeing the safety bar in place. The machine operator should be careful handling the parts.

The operator quickly checks the mold surface. In some plants, compressed air is used to clean out the mold after it's been removed. Sometimes a piece of plastic gets stuck in a mold.

Blow moulding jobs in the U.S

Plastic items can be created using various technologies. Blowmoulding is a process of using compressed air to expand hot plastic against the internal surfaces of a heated two-piece mold to make hollow one-piece items. Blow mould operators tear down machines that are involved in the process.

Blowmoulding is a manufacturing setting that involves exposure to safety risks such as proximity to hot materials and parts. Blow mould operators must wear protective equipment. A typical day includes standing for long periods and working at a fast pace.

Blow mould operators can fix problems. They know how to use the correct tools. Operators must demonstrate their skills by using visual observation and listening to mechanical sounds to make sure the equipment is working.

A good blow moulder needs to have good dexterity and strength to lift, pull, push and carry objects. Operators working in the plastic parts manufacturing industry earned an average wage of $13.14 an hour in May 2009, according to the U.S. Bureau of Labor Statistics. The job prospects for moulders may decline from 2008 to 2018).

Don't miss our report on Data Conversion Operator career guide.

Click Bear

X Cancel
No comment yet.