Parts Runner Job Description
The Parts Runner at Autonomous Collider, The quadriceps of a running athlete, Running in the Production Industry, The Third Baseman in the ALCS and more about parts runner job. Get more data about parts runner job for your career planning.
- The Parts Runner at Autonomous Collider
- The quadriceps of a running athlete
- Running in the Production Industry
- The Third Baseman in the ALCS
- Predictive Part Inventory Management
- The Growth of Parts Clerk Jobs in the Retail Industry
- A Food Runner Job in an Open-Loop Restaurant
- Production Runners
- The Heel Lift
- Sinotech: A Custom Injection Mold Factory
The Parts Runner at Autonomous Collider
A repair shop is included at some automotive or truck dealerships. If a part is needed for a shop that the dealership doesn't have in stock, the parts runners responsibility is to drive to the store where the part was ordered from to pick it up. Sometimes a customer needs to return a part.
The parts runner is supposed to pick up the part from the customer and return it to the dealership. The parts runner will need to inspect the part at the time of pick up to make sure it matches the part that was sold to the customer. The parts runner will need to give a receipt to the customer to show that the part was picked up.
A parts runner is responsible for his vehicle. The vehicle needs to be well maintained and it requires daily inspections of tires, lights and fluids. The vehicle needs to be kept clean and the parts runner needs to be removed.
Detailed article about Parts Specialist career guide.
The quadriceps of a running athlete
The quadriceps are four muscles at the front of your thighs that extend your knees and absorb shock when your foot strikes the ground. The quads contract to allow your knee to bend. When you are ready to push off the ground, they contract to extend or realign your knees.
Running in the Production Industry
As a runner, you will act as a general assistant, working under the direction of the producer and other production staff to ensure the smooth running of the production process. There are no requirements for becoming a runner. A relevant HND, degree or postgraduate qualification that has a practical focus may increase your chances of success, as it can equip you with an understanding of the industry, practical skills, a work experience placement and useful contacts.
Being a runner is a training position for other roles. You gain a lot of experience and insight into the industry. You can't set a time for how long you can work as a runner, but you can be in post for a year or two before you get a break.
Some employers feel that two to three years is the ideal amount of experience to gain. The assistant production coordinators may be moved to the role of production assistant. Runners progress to become head runner before moving to third.
First assistant roles. In smaller production companies there is no defined career structure, just more responsibility and a rise in salary, which is why promotion is more structured in larger companies. Runners have good networking opportunities and people often move between different areas of broadcasting.
Read also our story on Valet Runner job description.
The Third Baseman in the ALCS
The third baseman is in the infield and is responsible for covering third base. The fielder can cover a wider range of infield if they are positioned a couple feet off the bag. The third baseman must field any balls hit in their area, catch throws from teammates and throw out an opposing player at third.
The third baseman must be able to make a throw to the catcher when the opposing player is running to home plate. They need a strong arm to make the throw to first base. The catcher is behind home plate and is responsible for catching the pitcher's pitches.
The catcher plays in a squatting stance to give the pitcher a target in the strike zone. The catcher must cover home plate when the opposing team's runner is attempting to score, as well as fielding pop flys in foul ball territory and throwing out the runner's attempt to steal a base. The catcher needs to communicate with the pitcher and let the fielders know how many strikes and outs they are.
Predictive Part Inventory Management
Practical spare part management is the foundation for reliable plant operation. You need to know how to determine which spare parts are needed in order to make a comprehensive inventory system. It is best to establish a method that will adequately manage the movement and storage of your inventory.
You will either operate from a reactive or predictive position as a parts manager. Most companies build their management strategy around events. A manager should use a strategy to manage part inventory.
The ability to prevent problems before they arise is the essence of successful management. The collection and analysis of data is one of the things that can be used to find and solve underlying problems that may surface in the long run. Patterns of failure can reveal problems that are not visible, so be sure to look for them.
It is possible to make better use of resources by using predictive management. Building a successful stock program depends on having a good understanding of spare part lead times. When choosing which parts to stock, part lead time is very important.
If downtime is not important for your company, parts that can be quickly acquired can be left out of a stocking plan. Even a day or two without a part can be too long if you lose production time. Many parts with long lead times are not available for fast shipping.
Don't miss our post about Shift Runner job planning.
The Growth of Parts Clerk Jobs in the Retail Industry
Parts clerks work in manufacturing organizations. The position of a parts clerk can be physically demanding and may require workers to lift over a specific amount of weight to perform the duties of the job. The parts clerk has the responsibility of receiving and distributing parts to other workers in the company.
When receiving parts, a parts clerk must enter them into the company database. When parts are transferred to a production area, parts clerks record the materials and parts out of the system. A parts clerk should have good communication skills and good math skills.
The person in the role of a parts clerk should be attentive to detail. The Bureau of Labor Statistics said that the growth of parts clerks between 2008 and 2018 was average. The retail industry has the most jobs for parts clerks.
A Food Runner Job in an Open-Loop Restaurant
A food runner is a restaurant worker who helps the wait staff and improves the dining experience for customers. They perform a number of duties in a restaurant, including assisting guests with orders, taking feedback, and preparing table set-ups.
Detailed post on Automotive Parts Specialist job guide.
There are many people working under the title of Runner on any film set. Runners will work under the Assistant Director department on larger sets. The job role of a runner is not requiring any previous experience.
You will be applying for jobs against people who have experience already, because the industry is competitive. It is possible to gain paid work as a runner by gaining experience on major film sets. The job of a production runner is hard.
The Heel Lift
The difference in height between the forefoot and heel is called the Heel lift. Most shoes are small. A platform of zero to 4mm can be used.
Most runners find a higher lift more comfortable, and some feel a bit tight when changing from a higher to a lower lift. The amount of bounce or spring inside the shoe is what returns energy. A higher percentage gives you a more bouncier feeling, but other factors affect a shoe's responsiveness, dependent on the individual.
Read our paper on Auto Parts Coordinator job guide.
Sinotech: A Custom Injection Mold Factory
The mold can be used to determine the part's shape and size. It is also the special tooling injection mold. A mold can cost hundreds of thousands of dollars when making large parts.
The cost of the molds can be added to when it comes to smaller parts. Injection mold is the most economical for large quantities. A hot-runner mold eliminates the solidification of the runner and the sprue by locating the heaters around the channels.
The material in the sprue and runner channels is molten and ready to be injected into the mold in the next cycle. Sinotech is a custom injection molded company with competitive rates and more than 12 years of experience auditing, working with rubber mold factories in China, Taiwan and Korea. We are a U.S.-based company that is dedicated to managing your project on-site and delivering your parts at prices that beat the competition without sacrificing the quality, service and terms you expect from a domestic supplier.